Lars Nyborg

2024

Softening Behavior of a Cold Work Tool Steel and High-Boron Tool Steel Fabricated by Directed Energy Deposition

2024

Mechanical properties of Hastelloy X produced by laser powder bed fusion and affected by spatter redeposition

2024

In situ imaging of precipitate formation in additively manufactured al-alloys by scanning X-ray fluorescence

2024

Role of Cr in Mn-rich precipitates for Al–Mn–Cr–Zr-based alloys tailored for additive manufacturing

2023

In-situ detection of stochastic spatter-driven lack of fusion: Application of optical tomography and validation via ex-situ X-ray computed tomography

2023

Controllable Coating Graphene Oxide and Silanes on Cu Particles as Dual Protection for Anticorrosion

2023

Single track versus bulk samples: Understanding the grain refinement in inoculated ferritic stainless steels manufactured by powder bed fusion-laser beam

2023

Advancing novel Al-Mn-Cr-Zr based family of alloys tailored for powder bed fusion-laser beam process

2023

A Case Study for a Worn Tool Steel in the Hot Stamping Process

2023

Single track versus bulk samples: Understanding the grain refinement in inoculated ferritic stainless steels manufactured by powder bed fusion-laser beam

2023

Influence of iron nanopowder addition on the densification of chromium-prealloyed water-atomised powder metallurgy steel admixed with nickel

2023

Effect of layer thickness on spatters oxidation of Hastelloy X alloy during powder bed fusion-laser beam processing

2023

Corrosion behaviour of additively manufactured 316L and CoCrNi

Effect of low temperature carburizing on the corrosion and mechanical behavior of AISI 304 austenitic stainless steel after hydrogen charging

2023

Microstructure, mechanical properties and fracture mechanisms in a 7017 aluminium alloy tailored for powder bed fusion – laser beam

2023

Surface chemical analysis of spatter particles generated in laser powder bed fusion of Hastelloy X in process atmospheres with high and low oxygen content

2023

Machining of bi-metallic aluminium-grey cast iron engine block - Process optimisation by means of FEM

The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion - Laser Beam process

2022

Time and temperature dependent softening of a novel maraging steel fabricated by laser metal deposition

Capsule-free hot isostatic pressing of sintered steel to full density using water atomised iron and Cr-alloyed powder consolidated by cold isostatic pressing

2022

Characteristics of a modified H13 hot-work tool steel fabricated by means of laser beam powder bed fusion

2022

Laser-based Powder Bed Fusion of dispersion strengthened CoCrNi by ex-situ addition of TiN

2022

Laser powder bed fusion of an al-mg-sc-zr alloy: Manufacturing, peak hardening response and thermal stability at peak hardness

Pixel Intensity Of Near-Infrared Long-Exposure Images Acquired In-Situ As A Quality Control Tool In Laser Powder Bed Fusion Of Ni-Base Hastelloy X

2022

Predicting laser powder bed fusion defects through in-process monitoring data and machine learning

New Aluminium Alloy Tailored For Powder Bed Fusion - Laser Beam Process

2022

Effect of precipitation kinetics on microstructure and properties of novel Al-Mn-Cr-Zr based alloys developed for powder bed fusion – laser beam process

2022

Al–Mn–Cr–Zr-based alloys tailored for powder bed fusion-laser beam process: Alloy design, printability, resulting microstructure and alloy properties

2022

Increasing productivity of laser powder bed fusion manufactured Hastelloy X through modification of process parameters

2022

A neural network for identification and classification of systematic internal flaws in laser powder bed fusion

2022

Towards data-driven additive manufacturing processes

Effect of Density and Processing Conditions on Oxide Transformations and Mechanical Properties in Cr–Mo-Alloyed PM steels

2022

The effect of boron and zirconium on the microcracking susceptibility of IN-738LC derivatives in laser powder bed fusion

Thermal Stability In Al-Mn-Cr-Zr Based Aluminium Alloys Tailored For Powder Bed Fusion - Laser Beam

2022

Carbon-coated iron nanopowder as a sintering aid for water-atomized iron powder

2022

The Influence of Processing Parameters on the Al-Mn Enriched Nano-Precipitates Formation in a Novel Al-Mn-Cr-Zr Alloy Tailored for Power Bed Fusion-Laser Beam Process

2022

Surface chemical and geometrical properties of pure copper powder intended for binder jetting and sintering

2022

Study of defects in directed energy deposited Vanadis 4 Extra tool steel

Effect Of Process Control On The Densification Of Cr-Prealloyed PM Steels Through Vacuum Sintering In Conjunction With Capsule-Free Hot Isostatic Pressing

2021

Comparative study on the densification of chromium pre-alloyed powder metallurgy steel through nanopowder addition using design of experiments

2021

Grain refinement in additively manufactured ferritic stainless steel by in situ inoculation using pre-alloyed powder

2021

Linking in situ melt pool monitoring to melt pool size distributions and internal flaws in laser powder bed fusion

2021

Effect of part thickness on the microstructure and tensile properties of 316L parts produced by laser powder bed fusion

2021

Effect of Surface Sandblasting and Turning on Compressive Strength of Thin 316L Stainless Steel Shells Produced by Laser Powder Bed Fusion

Micropitting and microstructural evolution during gear testing -from initial cycles to failure

2021

Model-based design of AM components to enable decentralized digital manufacturing systems

2021

In-situ detection of redeposited spatter and its influence on the formation of internal flaws in laser powder bed fusion

Low-temperature carburized high-alloyed austenitic stainless steels in PEMFC cathodic environment

2021

Increasing the Productivity of Laser Powder Bed Fusion for Stainless Steel 316L through Increased Layer Thickness

2021

Sintering of bimodal micrometre/nanometre iron powder compacts - A master sintering curve approach

2020

Evolution of surface chemistry during sintering of water‐atomized iron and low‐alloyed steel powder

Atmosphere control during hot isostatic pressing of capsule free materials

2020

Effect of atomization on surface oxide composition in 316L stainless steel powders for additive manufacturing

2020

Oxide reduction and oxygen removal in water-atomized iron powder: a kinetic study

2020

Sintering behaviour of compacted water-atomised iron powder: effect of initial state and processing conditions

On surface carbides in low-temperature carburized austenitic stainless steels

Moisture content analysis of metal powders, using oven desorption followed by Karl Fischer titration

2020

Reduction of surface oxide layers on water-atomized iron and steel powder in hydrogen: Effect of alloying elements and initial powder state

2020

Surface integrity of machined electron beam melted Ti6Al4V alloy manufactured with different contour settings and heat treatment

2020

Surface chemical analysis of copper powder used in additive manufacturing

2020

Analysis of Iron Oxide Reduction Kinetics in the Nanometric Scale Using Hydrogen

Full Densification in PM Steels Through Liquid Phase Sintering and HIP Approach

Argon-helium mixtures as Laser-Powder Bed Fusion atmospheres: Towards increased build rate of Ti-6Al-4V

2020

Surface modification of Ti-6Al-4V powder during recycling in EBM process

2020

Effect of Powder Recycling on Defect Formation in Electron Beam Melted Alloy 718

2020

Effect of Nanopowder Addition on the Sintering of Water-Atomized Iron Powder

Investigation of surface and thermogravimetric characteristics of carbon-coated iron nanopowder

2019

Effect of argon and nitrogen atmospheres on the properties of stainless steel 316 L parts produced by laser-powder bed fusion

Atmosphere control during hot isostatic pressing of capsule-free materials

2019

Manufacturing full density powder metallurgy gears through HIP:ing

Environmental and safety aspects of AM metal powder recycling

Processability & Microstructure of Fe-C System via L-PBF

2019

Effect of Running-In (Load and Speed) on Surface Characteristics of Honed Gears

Laser powder bed fusion of bronze - Process optimization and influence on microstructure and mechanical properties

Vacuum sintering of chromium alloyed powder metallurgy steels

The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears

2019

Effect of Powder Recycling in Electron Beam Melting on the Surface Chemistry of Alloy 718 Powder

2018

Experimental and finite element simulation study of capsule-free hot isostatic pressing of sintered gears

Surface Oxide State on Metal Powder and its Changes during Additive Manufacturing: an Overview

Surface oxide state on metal powder and its changes during additive manufacturing: An overview

Surface analysis of fine water-atomized iron powder and sintered material

2018

Manufacturing of Valve Bridge Component Utilizing Lean Alloyed Powders and Vacuum Sintering

Influence of Iron Nanopowder Addition on Sintering of Water Atomized Iron Powder

Hot Isostatic Pressing of the Water Atomized Steel Powder: Possibilities and Challenges

Effects of workpiece microstructure, mechanical properties and machining conditions on tool wear when milling compacted graphite iron

Approaches to Reach Fully Dense Powder Metallurgical Materials

2018

Enhanced Densification of PM Steels by Liquid Phase Sintering with Boron-Containing Master Alloy

Oxide reduction and oxygen removal in water-atomized iron powder and its influence on sintering

Surface analysis of iron and steel nanopowder

2018

Effect of Powder Recycling on the Fracture Behavior of Electron Beam Melted Alloy 718

Surface chemistry of the titanium powder studied by XPS using internal standard reference

Effect of running-in - load and speed - on surface characteristics of honed gears

Influence of Ag addition on the microstructure and properties of copper-alumina composites prepared by internal oxidation

THERMAL DECOMPOSITION of N-EXPANDED AUSTENITE IN 304l AND 904l STEELS

COPGLOW and XPS investigation of recycled metal powder for selective laser melting

2017

Effect of Alloying Type and Lean Sintering Atmosphere on the Performance of PM Components

Effect of argon and nitrogen atmospheres on the properties of the as-built 316L stainless steel components by Laser Sintering

2017

Influence of running-in on surface characteristics of efficiency tested ground gears

Optimizing the synthesis of ultrafine tungsten carbide powders by effective combinations of carbon sources and atmospheres

Understanding the microstructure-properties relationship of low-temperature carburized austenitic stainless steels through EBSD analysis

Bonding EBM-built blocks of 316L steel, using hot isostatic pressing

2017

Visualizing shear bands in 3-D using axisymmetric sample: An experimental study

Innovative Powder Based Manufacturing Of High Performance Gears

Residual stress analysis of machined lead-free and lead-containing brasses

Effect of Powder Processing on the Sintering Mechanisms of Carbonyl and Water-atomized Iron Powders

Inverse identification of flow stress in metal cutting process using Response Surface Methodology

An FEM-based approach for tool wear estimation in machining

Characterization of the virgin and recycled nickel alloy hx powder used for selective laser melting

Characterization of virgin and recycled 316L powder used in additive manufacturing

An XPS investigation on the thermal stability of the insulating surface layer of soft magnetic composite powder

Surface chemical state of Ti powders and its alloys: Effect of storage conditions and alloy composition

Reactivity of carbon based materials for powder metallurgy parts and hard metal powders manufacturing

Surface oxides on metal powders: An overview of the effect of alloy composition and manufacturing method

Characterisation of EBM-Built Shelled Samples of Ti6Al4V Compacted by HIP

Machinability of CuZn21Si3P brass

As-HIP Microstructure Of EBM Fabricated Shell Components

Influence of friction models on FE simulation results of orthogonal cutting process

2016

Influence of Coolant Flow Rate on Tool Life and Wear Development in Cryogenic and Wet Milling of Ti-6Al-4V

Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report

Vacuum Sintering Studies On Chromium Alloyed PM Steels

Effect of different carbon sources on the sintering behaviour and mechanical properties of alloyed PM steels: From graphene to carbon black

Influence Of Cr Alloying Content On The Surface Oxide Composition In Case Of Water-atomized Steel Powder

Surface Characterization Of 60Cu-40Sn Bronze Powder

Effect of active constituents in the atmosphere on the sintering of chromium-alloyed PM steels

Copper Bronze Powder Surface Studied by XPS and HR SEM

Characterization Of The Virgin And Re-cycled Nickel Alloy HX Powder Used For Selective Laser Melting

The Role of Carbon Source in the Production of Ultrafine and Nanocrystalline WC-6Co Cemented Carbides

Stress distribution over gear teeth after grinding, running-in and efficiency testing

2015

Effect of Rheocasting on Corrosion of AM50 Mg Alloy

2015

Selective band gap manipulation of graphene oxide by its reduction with mild reagents

Assessment of the compacting and annealing process steps on the performance of finished Soft Magnetic Composite components

2015

Influence of temperature on the atmospheric corrosion of the Mg–Al alloy AM50

2015

Influence of the PM-Processing Route and Nitrogen Content on the Properties of Ni-Free Austenitic Stainless Steel

Thermodynamic And Kinetic Aspects Of Oxide Transformation During Sintering Of Cr-Prealloyed Pm Steels

Changes in the surface chemistry of chromium-alloyed powder metallurgical steel during delubrication and their impact on sintering

Lean Atmospheres for Sintering of Chromium Alloyed Powder Metallurgy Steels

Nitrogen uptake of nickel free austenitic stainless steel powder during heat treatment-an XPS study

Effect of active components of sintering atmosphere on reduction/oxidation processes during sintering of Cr-alloyed PM steels

Dissolution of carbon in Cr-prealloyed PM steels: effect of carbon source

Microstructural characterization and layer stability of low-temperature carburized AISI 304L and AISI 904L austenitic stainless steel

Microstructural characterization and layer stability of low-temperature carburized AISI 304L and AISI 904L austenitic stainless steel

2014

XPS Analysis of Oxide Transformation During Sintering of Chromium Alloyed PM Steels

EFFICIENCY AND TEMPERATURE RANGES OF ACTIVITY OF DIFFERENT REDUCING AGENTS DURING SINTERING OF CR-PREALLOYED PM STEELS

SINTER-HARDENING RESPONSE OF SINTERED STEEL BASED ON ASTALOY MO AND ITS DIFFUSION BONDED DERIVATIVES

Influence of the Steel Powder Type and Processing Parameters on the Debinding of PM Compacts with Gelatin Binder

Surface Oxide Transformation during HIP of Austenitic Fe-19Mn-18Cr-C-N PM steel

Microstructure Development in Powder Metallurgy Steels: Effect of Alloying Elements and Process Variables

Evaluation of the thickness and roughness of homogeneous surface layers on spherical and irregular powder particles

The Role of Carbon Source in the Production of WC Powders

EFFICIENCY OF DIFFERENT CARBON SOURCES DURING SINTERING OF CR-PREALLOYED PM STEELS: GRAPHENE, GRAPHITE OR CARBON BLACK?

Oxide Transformation in Cr-Mn-Prealloyed Sintered Steels: Thermodynamic and Kinetic Aspects

Effect of heat treatment in air on surface composition of iron-phosphate based soft magnetic composite components

Effective Synthesis of Nanocrystalline Tungsten Carbide Powders by Mechanical and Thermal Activation of Precursors

Surface Oxides on Gas and Water Atomized Steel Powders

Optimizing the Synthesis of Nanostructured Tungsten Carbide Powders by Effective Combination of Carbon Sources and Atmospheres

Thermogravimetry Study of the Effectiveness of Different Reducing Agents during Sintering of Cr-prealloyed PM Steels

Optimization of Carbothermal Reactions for Producing Nanostructured Tungsten Carbide Powders

Effectiveness of reducing agents during sintering of Cr-prealloyed PM steels

2014

Investigation of Low Temperature Creep Behaviour of PM Steels

Development of methodology for surface characterization of vanadium containing slag

THERMODYNAMIC AND KINETIC ASPECTS OF OXIDE TRANSFORMATION DURING SINTERING OF CR-PREALLOYED PM STEELS

NaCl-Induced Atmospheric Corrosion of the MgAl Alloy AM50-The Influence of CO2

2014

Multi-technique characterization of low-temperature plasma nitrided austenitic AISI 304L and AISI 904L stainless steel

Carbon control in PM Sintering

Effect of process parameters on surface oxides on chromium-alloyed steel powder during sintering

Surface Oxides on Gas and Water Atomized Steel Powders

Influence of delubrication process on the properties of sintered PM components

Low Temperature Creep Behavior of PM Components Under Static Load Conditions

Characterization of surface oxides on water-atomized steel powder by XPS/AES depth profiling and nano-scale lateral surface analysis

2013

Wear mechanism of CBN inserts during machining of bimetal aluminum-grey cast iron engine block

A study of the surface integrity after machining by means of non-destructive testing methods

Investigation of microstructure and material properties for 18 different graphitic cast iron model materials with focus on Compacted Graphite Iron (CGI)

Production of Porous NiTi Bulk Shape Memory Alloy by Starch Consolidation and Sintering of Pre-Alloyed Powder

Effect of Carbon Source on Oxide Reduction in Cr-Prealloyed PM Steels

Kohlenstoffreggelung beim Sintern

Carbon control in PM sintering: industrial applications and experience

2013

Influence of temperature on the atmospheric corrosion of the MgAl alloy AM50 produced by semi-solid cast and high pressure die cast technique

NaCl-induced atmospheric corrosion of MgAl alloy AM50 in semi-solid cast and high pressure die cast form; relation between alloy microstructure and corrosion

Synthesis of Nanostructured Tungsten Carbide Powders from Mechanically Activated Mixes of Tungsten Oxide with Different Carbon Sources

PM parts sintered state improvement achieved by carbon source selection

2013

The effects of grain size and feed rate on notch wear and burr formation in wrought Alloy 718

Characteristics of Surface Oxides: Similarities and Differences between Gas and Water Atomized Steel Powders

Thin film characterisation of chromium disilicide

An Experimental Investigation of the Influence of Cutting Edge Geometry on the Machinability of Compacted Graphite Iron

Effectiveness of Different Reducing Agents during Sintering of Cr-Prealloyed PM Steels

Dissolution of Carbon in Cr-Prealloyed PM Steels: Effect of Carbon Source

Machinability of Compacted Graphite Iron (CGI) and Flake Graphite Iron (FGI) with coated carbide

Surface phenomena during the early stages of sintering in steels modified with Fe–Mn–Si–C master alloys

Effect of Powder Properties on the Compressibility of Water-Atomized Iron and Low-Alloyed Steel Grades

Effect of Processing Parameters on Oxide Transformation in Cr-Mn-Prealloyed Sintered Steels

Lean atmospheres for sintering chromium alloyed PM steels

An experimental investigation of temperature and machinability in turning of compacted graphite irons

Effect of Delubrication Process Parameters on Surface Characteristics of Cr- alloyed PM steels

Tempering of 3Cr–0.5Mo sintered steel: influence on mechanical properties

Carbon Control in PM Sintering: Industrial Applications and Experience so Far

On-line Control of Processing Atmospheres for Proper Sintering of Oxidation-Sensitive PM Steels

2012

An Experimental Investigation of Machinability of Graphitic Cast Iron Grades; Flake, Compacted and Spheroidal Graphite Iron in Continuous Machining Operations

XRD and XPS Characterisation of Transition Metal Silicide Thin Films

Surface Chemical Analysis of Soft Magnetic Composite Podwers

Methodology for evaluating effectd of material characteristics on machinability - theory and statistics-based modelling applied on alloy 718

2012

Wear Evaluation on Ni3Al/MnS Composite Related to Metallurgical Processes

Control of delubrication process for PM components based on prealloyed steel powders

Stoichiometric Vanadium Oxides Studied by XPS

Development of methodology for surface analysis of soft magnetic composite powders

2012

Surface preparation of powder metallurgical tool steels by means of wire electrical discharge machining

Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy

Corrosion of stainless steels in simulated diesel exhaust environment with urea

Inhomogeneous Microstructure and Electrical Transport Properties at the LaAlO3/SrTiO3 Interface

Influence of Nitrogen Atmosphere on Reduction Mechanisms of a High Strength Austenitic Steel

Process Control System for Delubrication of PM Steels

Characterization of the surface of Fe–19Mn–18Cr–C–N during heat treatment in a high vacuum — An XPS study

Tribological properties of powder metallurgical tool steels used in powder compaction pressing dies

TEM study of carbide precipitation in low alloyed austempered ductile iron

Effect of Atmosphere Composition on the Surface Interactions during Sintering of Chromium-alloyed PM Steels

Characterization of High-Mn-Cr Austenitic Steel Powder Fe-19Mn-18Cr-C-N

An Experimental Study to Understand the Effect of Cooling Media in Metal Cutting

An experimental investigation of temperature and machinability in turning of compacted graphite irons

Fractographic Investigation of Chromium-alloyed PM Steels Sintered in Atmospheres with Varying Hydrogen Content

Oxide Transformation during Sintering of Cr and Mn Prealloyed Water Atomized Steel Powder

Contact Formation on Silicon Carbide by Use of Nickel and Tantalum in a Materials Science Point of View

Corrosion Properties of Thermally Annealed and Co-sputtered Nickel Silicide Thin Films

INFLUENCE OF PROCESS PARAMETERS ON DELUBRICATION OF PM STEELS

CHANGES IN OXIDE CHEMISTRY DURING CONSOLIDATION OF Cr/Mn WATER ATOMIZED STEEL POWDER

Delubrication of PM Components Based on Cr-Prealloyed Steel Powder – Chances and Risks

Surface Analysis at Different Sintering Stages of Steel Compacts with Mn and Si

A method for evaluation of potential machinability correlated with material properties between different batches of material

Temperature in Turning of Compacted Graphite Iron Materials having different Physical properties and Microstructure

Critical aspects of sinter-hardening of prealloyed Cr-Mo steel

Oxide Distribution in Prealloyed Water Atomized Steel Powder

Oxide Transformation During Sintering Of Prealloyed Water Atomized Steel Powder

Surface Interactions during Sintering of Chromium-alloyed PM Steels in Different Atmospheres

The effect of cold ring rolling on the evolution of microstructure and texture in 100Cr6 steel

The Effect of Alloying on Sinter-Hardening Response of Astaloy Mo and Its Diffusion Bonded Derivatives

Sintered Steels Alloyed with Manganese: Effect of Alloying Mode

Surface modification of PM gearlever

Effect of Sintering Atmosphere on the Transformation of Surface Oxides during the Sintering of Chromium Alloyed Steel

Surface Analysis of Prealloyed Steel Powders: Qualitative and Quantitative Aspects

Surface composition of the steel powders pre-alloyed with manganese

2010

Critical Aspects of Alloying of Sintered Steels with Manganese

Galling related surface properties of powder metallurgical tool steels alloyed with and without nitrogen

Methodology for Evaluating the Oxide Distribution in Water Atomized Steel Powder

In situ studies and simulation of mould filling with a model system for PIM

Optimized Selection of Processing Routes for Sintered Parts Manufacture: A Component-Oriented Approach

Analysis of oxide reduction during sintering of Cr-alloyed steel powder through photoacoustic spectroscopy measurements

Development and manufacture of brazed sintered part for wear resistant application

Optimising grey iron powder compacts

Corrosion behaviour of amorphous Ni-Si thin films on AISI 304L stainless steel

Optimised selection of processing routes for sintered parts manufacture: A component-oriented approach

Surface Analysis of Prealloyed with Manganese Steel Powder

Microstructural evolution during fracture induced by high strain rate deformation of 100Cr6 steel

Microstructure Development during Sintering of Manganese Alloyed PM Steels

Machinability of Compacted Graphite Iron (CGI), a Microstructural and Mechanical Properties Comparison Approach

Rheological and thermal properties of a model system for PIM

Evaluation of Surface Characteristics of Prealloyed Cr-Mo-steel Powder

Sputter deposition and XPS analysis of nickel silicide thin films

XPS calibration study of thin-film nickel silicides

Effect of Temperature Gradient and Sulphur Dioxide Addition on Erosion-corrosion of Iron- and Nickel-based Alloys

Tailoring the surface microstructure of starch consolidated vanadium-rich high speed steel powder

Initial Formation of Contact Layers on Ni/SiC Samples Studied by XPS

Study of Reduction/Oxidation Processes in Cr-Mo Prealloyed Steels during Sintering by Continuous Atmosphere Monitoring

Simulation of Mechanical Properties of Chromium Alloyed Sintered Steel

Electron microscopy of white-etching band generated by high-velocity parting-off of 100CrMn6 steel

Rheological properties and PVT-behaviour of a model system for PIM

Study of performance of Cutting Fluids in Drilling and Tapping

Wear Mechanisms of Tool Steels Used in PM pressing Dies

Modelling of Sintering Atmosphere and Microstructure Development of Chromium Alloyed Steel

High strain rate deformation induced by high-velocity forming of 100Cr6 steel

Microstructure and texture development during ring rolling of 100Cr6

BRITTLENESS OF STRUCTURAL PM STEELS ADMIXED WITH MANGANESE STUDIED BY ADVANCED ELECTRON MICROSCOPY AND SPECTROSCOPY

Liquid Phase Sintering of Ferrous Powder Metallurgical Materials

Interface Reactions and Electrical Properties of Ta/4H-SiC Contacts

MWNT reinforced melamine-formaldehyde containing alpha-cellulose

An Experimental Study to Understand the Effect of Cooling Media at Metal Cutting

Tailoring of nickel silicide contacts on silicon carbide

MACHINING OF GRAY CAST IRONS AND COMPACTED GRAPHITE IRON

Investigation of Ni/Ta contacts on 4H silicon carbide

Possibilities and constraints of implementing starch consolidated high speed steel in prototyping

Process development and surface characterisation on liquid crystalline polymer substrate based system on package with chip embedded for electronic application

Application of angle-resolved XPS for characterisation of SiC/Ni2Si thin film systems

Quantitative XPS Depth Profiling for Nickel/4H-SiC Contact with Layered Structure

Application of ARXPS for characterisation of SiC/Ni2Si Thin Film Systems

Study of Reaction Process on Ni/4H-SiC Contact

Microstructure of surface zones subjected to high-velocity parting-off

Effect of Vacuum Annealing and Nitrogen alloying on Gas Atomised M4 High Speed Steel Powder

Grey Iron Microstructures via Liquid-Phase Sintering

Effect of pre-treatment and Nickel Layer Thickness on Nickel Silicide/Silicon Carbide Contact

Microscopic Characterisation of Topography and Lubricant Distribution at the Surface of Powder Compacts

Adhesion study of copper layer deposited and liquid crystalline polymer for electronics packaging

Multi-wall Carbon Nanotube/Cellulose/Melamine-Formaldehyde Composites

Carbon nanotube/cellulose/melamine-formaldehyde composites

Effect of Silicon, Vanadium and Nickel on Microstructure of Liquid Phase Sintered M3/2 Grade High Speed Steel

X-ray photoelectron spectroscopy studies of indium tin oxide nanocrystalline powder

Surface Chemical Analysis of Pre-alloyed Water-atomised Steel Powder

Mechanical properties of MWNT/cellulose/melamine-formaldehyde composites